Payment & Shipping Terms:
|Product Name::||BFU||Material:||Powder Coat Steel/Galvanized Steel/Stainless Steel|
|Efficiency:||H13-U15||Powersupply:||AC Single Phase 110V/220V 50HZ/60HZ AC Single Phase 220V/380V 50HZ/60HZ|
|Size::||660*660*500mm Or Customize||Hepa Size::||610*610*69mm|
|MOQ::||5 PCS||Packaging::||Wooden Case|
ffu filter fan unit,
hepa fan filter unit
The BFU fan filter unit, which uses the latest technology in the United States, is a ceiling unit with a fan inside, used for turbulent flow and laminar flow clean room. BFU fan filter unit is one of the quietest and best-priced units on the market.
The BFU is an upgraded alternative to the FFU and hepa box. It is also a self-contained, modular end air supply with filtered power. BFU adopts the modern large-area new clean room clean safety theory, inhaling air from the top, and then filtering out the air.
1), lightweight module structure design, suitable for the installation of the ceiling keel (T-Grid) system of each manufacturer;
2), with dual overload protection high-performance motor, high static pressure, low noise, low energy consumption, can save operating costs;
3), low noise, the source of scientific motor and wind guiding structure design, so that the noise level of the product is lower than similar products;
4), the air is even, the wind pressure spreads evenly to meet the requirements of the international standard IES-RP-CC002 +/- 20%;
5), low fretting, the total vibration rate is less than 1mm / s, the amplitude does not exceed 3um;
6), flexible control mode, can be used for single-speed, three-stage speed regulation, five-stage speed regulation or stepless speed regulation to adjust air volume and with operation/abnormal indicator/abnormal dry contact for easy monitoring;
7), can be customized for a variety of special specifications;
8), pre-filter (G3-G4) and chemical molecular filter can be added as needed.
9), can install abnormal indoor fault LED lights;
10), can be installed with differential pressure gauge, wind speed sensor, etc.;
11), can be installed with a small 99 monitoring system or a large remote central monitoring system.
The main purpose of the BFU series is to purify the air sent to the clean area and to be used in the construction of 100-3000000 large-area clean rooms to meet the requirements of clean environment. It is installed on the T-Grid in the clean area or work area or on the equipment machine. It is widely used.
|Flange size||300*200mm(Side supply air)or Top supply air|
|Material||Powder coating or stainless steel or other steel|
|Average wind velocity||0.9m/s+-20%|
|Efficiency||Hepa 99.99% 0.3um|
|Media||Moisture-proof ultra-fine glass fiber|
|Port||Shenzhen or Guangzhou|
|Terms of Payment||30% by T/T in advance, the balance by T/T 7 days before the delivery.|
|Production Abililty||18000-20000 Pcs per month|
|Main Export Market||America, Europe, Middle East,etc and have got a lot of acclaims from the customers|
Contact Person: Nicole