Highlight:
air jet shower
, stainless steel air shower
Stainless steel air shower tunnel with Automatic sliding door
Air shower tunnel description
The air shower tunne is an auxiliary equipment for clean workshops and supporting clean rooms. It is used to blow dust on the surfaces of human bodies and carrying objects that enter clean areas.
At the same time, the air lock acts to prevent unpurified air from entering the clean area. It is an effective device for human body, material purification, and prevention of outdoor air pollution in the clean area. It is versatile and can be used with all cleanrooms and cleanrooms. The air shower channel is suitable for large-scale purification companies.
Air shower tunnel features:
1). Use circular arc angles that are more suitable for clean room principles
2).The system automatically controls the operation, two-door electronic interlocking, and has a photoelectric sensor, one-way channel air shower, enter from the non-clean area, after the door closes the infrared sensor, someone blows on the shower, blows the shower and locks, only Can go out from the air shower room;
3). The overall cold-rolled steel production, external surface electrostatic spray treatment
4) .Doors, floor, nozzles are made of stainless steel, beautiful
5).Soft key touch type time relay, LED display and set the blowing time, the range is adjustable in 10-99s, double door automatic locking when blowing;
6). Using the initial, high-efficiency two-stage filtration system, a partition of high efficiency filter, filtration efficiency: 99.99%, to ensure the purification level
7). The wind mouth outlet speed of up to 25m / s, blowing to the human body wind speed 18m / s or more
8).Using EVA sealing material, high sealing performance
9). Using imported electronic components, reliable performance
10). With all stainless steel multi-angle adjustable nozzle, Nantai double vortex shell external rotor high wind volume low noise fan, surface wind speed greater than 25m / s;
11). Advanced noise reduction mute device system.
12).Using a modular design program, the assembly and transportation is very convenient
13). microcontroller microcontroller controller, intelligent voice prompt system, people in the shower when the control system automatically sends out voice prompts to complete the entire sequence of blown shower dust.
14). LED display can clearly indicate the blowing time, and the state. Blowing time can be adjusted in the range of 10-99S.
15). Infrared photoelectric automatic sensor switch controls the air shower to avoid unmanned air blowing.
Cargo Air Shower
1.G4 pre filter and H13 HEPA filter, 2-stage filtration. Ensure purification level.
2.Fully automatic infrared induction blowing.
3.Equipped with 360-degree adjustable stainless steel nozzle.Left and right sides blowing shower, large air volume and low noise centrifugal fan.
The air velocity of the nozzle can reach 22-27m/s.
4.Adopt LCD time display, air shower time is adjustable from 0-99S, show the completion time of air shower, with humanized voice prompts.
Air shower tunnel Parameter
| |
|
Quantity and specification |
unit |
remarks |
|
|
SUS304 stainless steel |
|
|
| Nozzles |
48-96 |
pcs |
|
| Outlet air speed |
≥20 |
m |
|
| Working time |
0—99 |
S |
Adjustable
|
| Rated Voltage |
380 |
V |
3 phase 4 wire |
| Power |
2.25-10 KW |
KW |
50Hz |
| Hygienic standard |
High efficiency |
|
|
| Noise |
≤65 |
DB |
|
| External dimension |
W*H 1700*2300 |
Mm |
|
| Net size |
W*H 800*1900 |
Mm |
|
| Channel type |
Seal type Tunnel type |
| Remarks |
Please inform us before the contract comes into effect.
|
Success case show
FAQ
1. Who are we?
We are based in Guangdong, China, start from 2011,sell to Domestic Market(60.00%),Southeast Asia(15.00%),North
America(10.00%),Western Europe(5.00%),Southern Europe(5.00%),Northern Europe(5.00%). There are total about 200 people in our office.Our company and factory are located in Dongguan City, Guangdong Province, China. We welcome you to visit us at your convenience to learn about our factory and products.
2.What can you buy from us?
Air Shower, Cargo Air Shower,PVC Fast Rolling Shutter Door,HEPA Box , FFU,BFU, Pass Box, Clean Bench,Clean Booth,Operating Room,Medical Cabinets,Laminar Flow Ceiling,Medical Scrub Sink,AIR FILTER.
3.How long is your delivery time?
Normally 10-15 days for small bulk after get payment and specification confirmed, delivery is differ from different equipments and qty for bulk production.
4. What's your payment terms?
50% deposit after PI confirmed and balance 50% should be paid before shipment. If the order's total amount below $5000, It should be paid 100% in advance.
5. Do you provide samples?
Yes, we can provide sample, but the customer should be pay sample fee and shipment cost. The sample fee can be refund after official order placed for same models.
Your message must be between 20-3,000 characters!
