|Material:||Stainless Steel ,powder Coat Steel||Power:||170w|
|Power Supply:||AC 220 V /50 Hz||Purification Grade:||Class 100|
|Air Velocity:||0.35-0.65 M/s||Air Flow:||500-1500 M3/h|
clean room fan filter units,
hepa fan filter unit
FFU (Fan Filter Unit) is the combination of the Fan and Filter, also known as "filtering equipment of the air blower. Head is usually installed in the clean room terminal air supply, usually placed in the hoisting of the "dry" gasket seal on the keel frame. Above the head part is fan module, the following sections for the filter. According to the requirements of cleanliness, the filter can provide different levels of efficiency (HEPA) or super efficient (ULPA) filter, clean air for clean room. Fan module in addition to overcome the resistance of the hepa filter head lower, but also overcome the resistance of the entire circulation wind all components of the channel, so as to maintain a set of wind speed operation. Flexible head system had advantages of simple design and construction, wind speed regulating, clean area is easy to change wait for a characteristic, therefore has become one of the popular industrial clean room system.
Product Information: Fan Filter Unit (FFU) is self-clean air equipment, it can be installed to the ceiling or set on the holder, which can reach Class100. FFU has HEPA filter and pre-filter, the fan absorbs the air from the top through the prefilter and HEPA filter then the clean air at 0.45m / s ± 20% speed blow out by the whole air supply grill.
Salient Features: long use life, low noise and vibration, maintenance-free, adjustable air speed, thousands unit can be easy controlled.
Factory Strict Test: according to international ISO14644-1 standards, with a dust particle counter detection one by one to ensure the quality.
Application: widely used in the semiconductor, electronics, flat panel displays, and optical disk drive manufacturers, bio- industries, assembled clean room and laminar flow hood.Etc.
|Cabinet Material||Epoxy powder coated steel/Galvanized steel with aluminum painted/Stainless steel|
|Initial pressure loss||220pa/0.45m/s||220pa/0.45m/s||220pa/0.45m/s||220pa/0.45m/s|
Contact Person: Nicole