Highlight:
deep pleated hepa filter
, high efficiency hepa filter
Aluminum frame mini pleated hepa filter of FFU for clean room
Mini pleated hepa filter
High-efficiency non-clapboard filter series can effectively reduce the operating cost of the clean room. Through the effective leak detection and scanning test before leaving the factory, it can meet the strict requirements of special industries. It is suitable for various clean rooms, clean benches, pharmaceutical factories, and biological Plant, food processing, and any other place that requires strict control of air pollution.
1. Mini pleated hepa filter description
Mini pleated hepa filter series can effectively reduce the operating cost of the clean room. Through the effective leak detection and scanning test before leaving the factory, it can meet the strict requirements of special industries. It is suitable for various clean rooms, clean benches, pharmaceutical factories, and biological Plant, food processing, and any other place that requires strict control of air pollution.
2. Mini pleated hepa filter structure
1), Unique seamless sealing technology, better sealing effect, more durable, not easy to leak.
2), Small size, light weight. Anodized aluminum alloy frame material is used to facilitate handling and installation.
3), Can provide 50mm 70mm 90mm and other various thickness.
4), The maximum efficiency of capturing 0.3 micron particles of MPPS by the laser scanning count is up to 99.995% (EN1822).
3. Mini pleated hepa filter installation
1, can be used with a variety of brand FFU installed on ceiling keel or color plate ceiling.
2. The HEPA filter needs to be installed in the air duct, and is to be blown into the room, and installed after the air volume and indoor cleanliness meet certain requirements, in order to prolong the service life of the HEPA filter.
3, in order to guarantee the service life of the high-efficient filter, it is recommended that before the air enters, it must pass a pre-filter which is not lower than F8 (colorimetry 90%-95%).
4. Standard Model Technology Parameter
| Size(mm) |
Rated air flow(M3/h) |
Recommended air flow |
Initial pressure drop Pa |
Final Pressure Drop Pa |
efficiency % |
| 305×305×69 |
260 |
260 |
≤160Pa |
≤350Pa |
99.999 |
| 484×484×69 |
700 |
700 |
≤160Pa |
≤350Pa |
99.999 |
| 610×610×69 |
1100 |
1100 |
≤160Pa |
≤350Pa |
99.999 |
| 915×610×69 |
1600 |
1600 |
≤160Pa |
≤350Pa |
99.999 |
| 610×610×90 |
1500 |
1500 |
≤160Pa |
≤350Pa |
99.999 |
| 915×610×90 |
2000 |
2000 |
≤160Pa |
≤350Pa |
99.999 |
Your message must be between 20-3,000 characters!
