|Product Name::||FFU / BFU||Material:||Powder Coat Steel/Galvanized Steel/Stainless Steel|
|Efficiency:||H13-U15||Powersupply:||AC Single Phase 110V/220V 50HZ/60HZ AC Single Phase 220V/380V 50HZ/60HZ|
clean room fan filter units,
ffu filter fan unit
The BFU fan filter unit, which uses the latest technology in the United States, is a ceiling unit with a fan inside, used for turbulent flow and laminar flow clean room. BFU fan filter unit is one of the quietest and best-priced units on the market.
FFU is an abbreviation for English, the full name is Fan Filter Units, which means "fan filter unit (unit)". That is, a fan and a filter (HEPA) or Ultra High Efficiency Filter (ULPA) are combined to form a self-powered end purification device. Specifically, it is a self-contained, modular end air supply with filtering efficiency. The fan draws in air from the top of the FFU and filters it through HEPA. The filtered clean air is evenly sent out over the entire wind surface at a wind speed of 0.45 m/s ± 20%.
1). Extremely low operation consumes power and reduces costs.
2, built-in air duct diversion system, reduce noise and pressure loss, improve fan efficiency.
3), can easily match the various brands of T-GRID and HEPA, ULPA.
4). The fan filter unit fan adopts high efficiency centrifugal fan, which can provide high air volume and high static pressure conditions. The service life requirement is up to 50,000 hours.
5), suitable for use in cleanliness class Class 1-1000 class clean room.
6), especially suitable for assembly into ultra-clean production lines, can be arranged according to process needs for a single use, can also be more than one series to form 100 assembly line
7). Before the products leave the factory, they are all tested according to US Federal Standard 209E using dust particle counters to ensure quality.
|plenum chamber materials||Aluminized zinc plate/stainless steel.||Aluminized zinc plate/stainless steel.||Aluminized zinc plate/stainless steel.|
|Average wind velocity||0.4/0.45/0.5||0.4/0.45/0.5||/0.4/0.45/0.5||m/s|
|Extemal static pressure||97(10mmAq)||97(10mmAq)||97(10mmAq)||pa|
|Hepa filter size||915×610×69||1170×570×69||1220×610×69||mm|
|Filter initial pressure loss||180Pa@0.45m/s||180Pa@0.45m/s||180Pa@0.45m/s|
|Fan vibration coefficient||0.2-0.5mm/s||0.2-0.5mm/s||0.2-0.5mm/s|
Contact Person: Nicole Yu