Anti - Static Primary Pocket Air Filter With Metal Mesh Covered 520*520*21mm

Mini-pleat medium efficiency primary air filter covered with metal mesh

1,Mini-pleat primary air filter description

It can capture 1-5um of granular dust and various suspended materials. It adopts hot-melting process, stable structure, reduces risk of leakage, large air volume, low resistance, high dust holding capacity and reusable cleaning. Type: frameless and framed, filter material: special non-woven fabric or fiberglass, efficiency: 60% ~ 95% @ 1 ~ 5um (colorimetric method), use the highest temperature, humidity: 80 ° C, 80% .

2, Mini-pleat primary air filter features

FB plate medium efficiency filter
Type: plate filter
Filter material: polyester fiber
EN779 level: F5, F6, F7, F8
Filtration accuracy: main filter object: ≥1μm
DIN 53438 Flame retardant standard: F1
FB plate medium efficiency filter material:
Polyester fiber; sealant: polyurethane glue; outer frame: aluminum alloy frame, galvanized sheet frame;
FB plate medium efficiency filter features:
Large air volume; large resistance; firm structure.

FB plate type medium efficiency filter use:
1), air conditioning system efficiency filter
2), pharmaceutical, hospital, cosmetics, semiconductor electronics, precision machinery, food and other industries air filter
3), spray paint air effective filtration.

3.Mini-pleat primary air filter replacement cycle

Under the condition of rated air volume, it can be used normally for 4~6 months, that is, the filter needs to be replaced;

Or when the resistance of the filter reaches 350Pa or more, the filter must be replaced;

If the concentration of dust in the environment is large, the life cycle will be reduced.

4.Mini-pleat primary air filter use precautions

Regularly check the filter over-plastic net for damage, whether there is any debris on the air inlet surface, or whether the surface of the filter material is damaged; if the surface is blocked, it should be removed; if the surface of the filter material is damaged seriously, it must be replaced with a new filter material or Replace the filter with a new one; when replacing the filter, first remove the air inlet, ceiling, and floor filters, then carefully clean the ventilation ducts, dark corners, and dusty areas, close the paint door, and let the air blow out. Blow for 1 hour; when installing the filter, ensure that the sealing edge of the frame is well sealed to prevent air leakage.